Stock Program

STOCK PROGRAM

 

Stainless Steel Coil & Strip
Grade 304, 304/304L, 316, 316/316L, 2205, 4003/AtlasCR12, 4003Ti/AtlasCRTi
Thickness (mm) 0.45 to <5.0
Width (mm) 914, 1219, 1500, 2000, Customer specific strip
Length (mm) 1829, 2438, Customer specific length
Finish 2B, No.4, BA, No.1 (HRAP), Customer specific polish
Standard coating Paper interleaf, PE
Optional coating Laser, Deep drawing PVC

The information provided is for standard stock product and does not encapsulate all available combinations. Please contact the nearest Atlas Steels sales outlet if non standard product is required and we will enquire about its availability through our global supply network of mills and stockists.

Stainless steel coil and strip 0.45mm to less than 5.0mm – ASTM A240M
Atlas Steels has from years of experience determined the popular range of grades, widths and thicknesses of stock to be held in its coil program to service customer demand. The standard range is as follows:

Grade Finish Thickness (mm) Width (mm)
304 2B,No. 4 PE 0.55 914, 1219
304 2B, No. 4 PE 0.70 914, 1219
304 2B, 2B PE, No. 4 PE, BA PE 0.90 750, 914, 1219
304 2B, 2B PE, No. 4 PE, BA PE 1.20 750, 914, 1050, 1219, 1500
304 2B, 2B PE, No. 4 PE 1.50 914, 1219, 1500
304 2B, 2B PE, No. 4 PE 1.60 914, 1219, 1500
304 2B, 2B PE, No. 4 PE 2.00 914, 1219, 1500
304 2B, 2B PE, No. 4 PE 2.50 914, 1219, 1500
304 2B, 2B PE, No. 4 PE 3.00 914, 1219, 1500
304L 2B, 2B PE 4.00 1500, 2000
316 2B 0.55 1219
316 2B 0.70 1219
316 2B 0.90 1219
316 2B,No. 4 PE 1.20 1219
316 2B,No. 4 PE 1.50 914, 1219, 1500
316 2B,No. 4 PE 1.60 914, 1219, 1500
316 2B,No. 4 PE 2.00 914, 1219, 1500
316 2B,No. 4 PE 2.50 914, 1219, 1500
316 2B,No. 4 PE 3.00 914, 1219, 1500
316L 2B, 2B PE 4.00 1500, 2000
430 BA PE, No. 4 PE 0.70 914, 1219
430 BA PE, No. 4 PE 0.90 914, 1219
3CR12 2B 1.2 1250
3CR12 2B 1.6 1250
3CR12 2B 2.0 1250
AtlasCR12Ti No. 1 3.0 1250, 1500
3CR12 No. 1 4.0 1250, 1500

Other Grades and Widths
Grades: 301L, 310, 321, 2205, 253MA.
Widths (mm): 600, 750, 900, 1050, 1200, 1524.

Fixed billing weights for flat rolled stainless steel

Thickness Austenitic nominal mass (kg/m²) Ferritic nominal mass (kg/m²)
0.45 3.68  
0.55 4.50  
0.70 5.72  
0.90 7.36  
1.20 9.81 9.61
1.50 12.3  
1.60 13.08 12.85
2.00 16.35 16.02
2.50 20.44 20.03
3.00 24.53 24.04
4.00 32.71 32.06

Austenitic stainless steel theoretical weight is based on 8177kg/m³
Ferritic stainless steel theoretical weight is based on 8000kg/m³

Actual weights may vary from the above due to specific grade and dimensional tolerances.